Instrument Panel Indicators - Honda 2007 S2000 Online Reference Owner's Manual

Main Menu
Table of Contents

Instrument Panel Indicators

The instrument panel has many
indicators to give you important
information about your vehicle.
Seat Belt Reminder
Indicator
This indicator comes on when you
turn the ignition switch to the ON
(II) position. It reminds you and your
passenger to fasten your seat belts.
A beeper also sounds if you and your
passenger have not fastened your
seat belts.
If you turn the ignition switch to the
ON (II) position before fastening
your seat belts, the beeper sounds,
and the indicator flashes. If you do
not fasten your seat belts before the
beeper stops, the indicator stops
flashing but remains on.
46
If your passenger does not fasten
their seat belt, the indicator comes
on about 6 seconds after the ignition
switch is turned to the ON (II)
position.
If either of you do not fasten your
seat belt while driving, the beeper
will sound and the indicator will flash
again at regular intervals. For more
information, see page
16
Low Oil Pressure
Indicator
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page
Charging System
Indicator
If this indicator comes on when the
engine is running, the battery is not
being charged. For more information,
see page 186 .
U.S. Canada
This indicator has two functions:
It comes on when you turn the
1.
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. A beeper
sounds if you drive with the
. parking brake not fully released.
Driving with the parking brake not
fully released can damage the
brakes and tires.
If it stays on after you have fully
2.
released the parking brake while
186 . the engine is running, or if it
comes on while driving, there
could be a problem with the brake
system. For more information, see
page 188
Parking Brake and
Brake System
Indicator
.