Dismantling Instructions; Dismantling The Dvd Module; Dismantling Of The Cover Front Display; Dismantling The Main Board - Philips FWD182 Service Manual

DISMANTLING INSTRUCTIONS

Dismantling the DVD Module

1) Loosen the 4 screws at top cover , 2 screws at slide Cover
and 4 screws at back panel as Figure 1 & 2.
2) Loosen the 4 screws at DVD loader bracket as Figure 3.
3) Loosen the 4 screws at DVD loader as Figure 4.
A
Figure 1
Figure 3
4) Push the gear slowly towards the front as shown in figure
5 until the CDC tray starts to move out of the Front Cabinet.
The CDC tray is now disengaged and can be pulled out
completely.
Figure 5
3-1
Figure 2
Figure 4
5) Remove the Cover Tray as shown in figure 6.
Figure 6

Dismantling of the Cover Front Display

1) Remove the Volume knobs & Mic knob as stated in Dismantling the Cover Front Display in Figure 7 & 8.
Put out
Figure 7

Dismantling the Main board

1) Release 7 screws 'E' to free the Main board from the back panel Assembly as shown in Figure 9.
2) Loosen 1 screw 'G' at the side of the set as shown in Figure 10.
3) Release 2 screws ' F ' on bottom of the cover as shown in Figure 11.
Figure 9
3-1
Put out
Figure 8
G
Figure 10
F
Figure 11