Dismantling Instructions - Philips MCD298 Service Manual

DISMANTLING INSTRUCTIONS

Detaching the Stands from the Speakers and Main Sets
1
To detach the stand from the main unit,
a. As shown, hold down PRESS 4
b. Move out the stand to detach.
1
Dismantling of the Front and Rear Panel assembly
1) Loosen 4 screws A to remove the Front Panel Ass'y by sliding it
out towards the underside before lifting up as shown in Figure 1.
2) Loosen 7 screws B and 4 screws C to remove the Rear Panel
Ass'y .
- 7 screws on the rear
- 2 screws each on the upside & downside
as shown in Figure 2.
3) Loosen 10 screws D (see Figure 3) to remove the CD Door
Track, then remove Left and Right CD Door.
- 5 screws each on the upper & under side.
4 - 1
Detach the speaker stands in the same way as
2
you do the main unit stand
B
B
A
Figure 1
C
Figure 2
Detaching the Control Panel Ass'y from the Front Panel Ass'y
1) Loosen 11 screws E (see Figure 4) to remove the Control
Panel Ass'y .
4 - 1
D
Figure 3
E
Figure 4