Cook Time; Kitchen Timer - Bosch NETP066SUC Use And Care Manual

Cook time

You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
▯
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
▯
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
▯
power switch after each use.
Setting the cook time
Select the desired element and power level.
1.
Touch the Timer key twice. The indicator for the
2.
desired element lights up.
lights up on the Timer display.
Within the next 10 seconds, set the required time
3.
using the number keys.
The timer begins to count down.
The element must be selected in order to display the
countdown for the particular heating element.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator
the element display.
‹‹
Timer display. The indicators disappear and the beep
stops.
Changing cook time
Select the element and touch the Timer key twice. Set
the new cook time using the number keys 0 to 9.
16
and min appear, and
r
appears in
‹
lights up for 10 seconds on the
Cancelling cook time
Select the desired element and touch the Timer symbol
twice. The min, __ and
0 from the number keys until
Timer function with AutoChef™
When you cook using AutoChef™, the programmed cook
time begins to count down once the selected element
reaches the set temperature.
Notes
You can set a cook time of up to 99 minutes.
▯
To program a cook time of less than 10 minutes,
▯
always select 0 first before you select the required
value.
After a power outage, the timer function will be
▯
cancelled.
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
‹‹
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note: The cook time can be changed or cancelled for
any element:
Touch the Timer key several times until the
of the required element lights up. Adjust the cook time
with touch keys 1 to 9 or deactivate with 0.

Kitchen timer

The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. You can also use the
kitchen timer when the cooktop is turned off or locked.
This function does not automatically switch off an
element.
Setting the kitchen timer
Touch the Timer key.
1.
The __, min and
Set the required time using the number keys 0 to 9.
2.
After a few seconds, the __ indicator goes out and the
programmed time starts to count down.
Once the time has elapsed
At the end of the programmed time, a beep will sound
and will appear on the timer display. The
‹‹
is on. The display turns off after 10 seconds.
Changing the time
Touch the Timer key. The __ and
Change the time using the number keys 0 to 9.
Clearing the time
Touch the Timer key. The __ and
Touch the 0 key until
The indicator goes out.
V
indicators light up. Then select
r
is displayed.
‹‹
‹‹ appears in the timer display.
indicators light up.
V
indicators light up.
V
indicators light up.
V
appears on the timer display.
‹‹
indicator
$
indicator
V