Cook Time - Bosch NET8066UC Use And Care Manual

Hide thumbs Also See for NET8066UC:
Table of Contents

Advertisement

Available languages

Available languages

bacon
eggs
fish
pancakes
Deep fat frying** (in 1-2 qt. oil)
deepfrozen foods, e.g. chicken nuggets (0.5 Ib per serving)
other e.g. doughnuts
(0.5 Ib per serving)
* ongoing cooking without lid
** without lid
*** turn several times
Power levels
6-7
5-6
5-6
5.-6.
Cook time
You can use the timer function to set a cook time for any
element. The element will turn off automatically
once the
set time has elapsed.
• ,
CAUTION
@
@
@
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
of time, especially
at high heat settings.
Make sure the cooktop is turned off with the main
power switch after each use.
3. Within the next 10 seconds set the desired cook time
using the number keys.
The timer starts to count down. If you have set a cook
time for several elements, the timer display indicates
the remaining time for the selected element.
m
Setting the cook time
1. Select the desired element and power level.
2. Touch the Timer ke_.The indicators
I--)1and min light
up and timer value UU is indicated in the timer display.
Once the cook time has elapsed
When the cook time has elapsed, the cooking zone
turnes off. You will hear a beep and on the indicator, LaLann
will light up for 10 seconds. The I-->1lights up. Touch any
indicator. The indicators
go out and the audible signal
ceases.
I-->1
©
rain
i-'I I-'I
m
4
Changing cook time
Touch the Timer key until the I--)1indicator lights up on
the desired element. Adjust the cooking time using the
number keys.
Cancelling cook time
Touch the Timer key until the I--)1indicator lights up_on
the desired element. Then set the timer value to LaLawith
the number keys. The I--)1indicator goes out.
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically
turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note:
The cook time can be changed or cancelled for
any element:
Touch the Timer key several times until the I--)1indicator
of the desired element lights up. Adjust the cook time
using the number keys, or deactivate it by setting the the
timer value to L'?.
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Net8066suc

Table of Contents