Control Settings - GE GDF410 Owner's Manual

Control Settings

Power
1
Press the POWER button to turn on the unit to be operated. The LED will be displayed when the dishwasher is on.
Programs
2
When the dishwasher is turned on, you can press the PROGRAMS button to select the wash cycle. A light on the display
will indicate which cycle has been selected.
NOTE : The following information about cycle duration and water consumption are approximate. Results will vary
based on various factors, including but not limited to incoming water temperature and pressure as well as soil level.
HEAVY WASH Wa
This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This cycle may not
remove burned-on foods. Everyday dishes are safe to be used in this cycle.
NORMAL WASH Wa
This cycle is meant for loads of everyday dishes, glasses and cookware with medium soils that have not been
pre-rinsed.
LIGHT WASH
Water: 14.3 liters, Time: 95 minutes
This cycle is meant for loads of everyday dishes, glasses and cookware with medium soils that have not been
pre-rinsed. This cycle features reduced wash times to allow for faster cycle completion. This cycle also has a
reduced time heated dry.
RINSE ONLY
Water: 7.3 liters, Time: 25 minutes
For rinsing partial loads that will be washed later. Do not use detergent with this cycle. This cycle does not include
heated dry.
HE ATED DRY ATED DRY
3
When the wash cycle has been selected, you can choose the option by pressing the "Heated Dry"
button.
1
Press the HE ATED DRY
HEATED DRY When the "Heated Dry" option is selected, the heater will be activated during the drying
portion
4
Start / Cancel
When the program and options have been selected, make sure the door is closed press the START/
CANCEL button. To stop or reset the wash cycle, press the START/CANCEL button, the dishwasher will
stop washing.
Control Lock/Child Lock
5
Press the associated button (either Child Lock or Options) for
the LCD. No buttons
To cancel the option, press the same
will no longer be shown on the LCD and the dishwasher controls will be unlocked.
Delay w ash
6
This option allows you to delay the start of a wash cycle for 2\ \ , 4,8 hours. When the dishwasher is on,
Delay w ash
press the
ter: 25 liters, Time: 130 minutes
ter: 14.3 liters, Time: 130 minutes
ATED DRY button once, the "Heated Dry" will be selected;
of the cycle.
can be operated when the dishwasher controls are locked.
button for 3 seconds, the LOCK light
button to choose the number of hours you want to delay the start of the wash cycle.
3 seconds the LOCK light will display on
GEAppliances.com
7