Toshiba e-studio2500c Scanning Manual page 85

7
Press the [SCAN!] button.
If you want to change the scan conditions, press the desired agent button and set the
scan conditions as you require.
8
If the "To continue, place document on glass. And press Scan!"
message is displayed, place another original on the glass and
press [SCAN!] to scan another original, or press the [JOB FINISH]
button to finish scanning.
When the original is set on the Automatic Document Feeder (optional), this screen is
not displayed. However, this screen is displayed when you press the [CONTINUE]
button while scanning the originals.
If you want to cancel the storage of the scanned data, press the [JOB CANCEL] but-
ton.
You can change the setting of the original type and scanning conditions, using the
[EDIT] button before pressing the [SCAN!] button.
Using Scan to E-mail template when User Authentication for Scan to E-mail
is enabled
When the User Authentication for Scan to E-mail is enabled, operate the following procedure to
use the template that is registered the Scan to E-mail agent.
1
Place the original(s).
For instruction about placing the originals, see Operator's Manual for Basic Func-
tion.
Scanning Using Template 83