SAFETY INFORMATION CAUTION: To reduce the risk of fire and electric shock, do not remove the cover of this product. Refer all maintenance requests to authorized personnel only. This lighting flash arrow symbol in a triangle alerts users to the presence of non-insulated high voltage within the product's enclosure that present an electrical shock hazard.
REMOTE CONTROL 1. STANDBY: Power Standby Button. 2. COAXIAL1/2: Coaxial Input Selection. 3. FM: FM Selection Button. 4. STEREO: Stereo or Mono FM Radio Selection. 5. MEMORY: Station Memory Button. 6. TU-CH : Preset Channel Down. 7. CENTER-: Center Volume Level Down Button 8.
PLACING THE UNIT The Sound Bar truly enhances the home theatre experience. Take advantage of SRS 3D stereo technology, listen to surround sound without having to attach six or seven extra speakers. For the best sound quality, place the Sound Bar as show in the diagram below.
POWER 1. Connect the Power Cable Plug into your AC Mains Supply and switch it to the ON position. 2. Press the POWER switch on the left side panel to switch the unit ON 3. “-” will appear on the front LCD to indicate it is in Standby mode. 4.
INPUT SELECTION Using the front display 1. Press the INPUT button on the front panel. Press the INPUT button to select which input mode you require according to your setup. The input sequence is as following: Optical 1 Optical 2 Coaxial 1 Coaxial 2 87.50 (FM Radio)
SRS FUNCTION Press the ‘SRS’ button on the remote control, to switch between ‘SRS-OFF’ and ‘SRS-ON’. DSP FUNCTION Press the ‘DSP’ button on the remote control, the front LCD will display ‘H-1’. The preset equalizers are as follows: H-1 : LIVE H-2 : HALL H-3 : THEATER H-4 : CHORUS...
GETTING THE BEST SOUND QUALITY In order to get the best sound quality from the Sound Bar, we recommend the following: Listening to Music. 1. When listening to music, connect your audio device to the Aux inputs on the back of the Sound Bar. 2.
Storing a FM frequency 1. Press the SCAN buttons on the remote control to select the frequency you wish to store into the memory. Press the ‘MEMORY’ button on the remote control. 2. Press the ‘TU-CH ’ buttons on the remote control to select a memory storage location.