Advertisement
3.
Prepare the CAMERA to be installed.
Tie up the saFetY wire of the caMera on the BracKet wire of the FraMe set.
Arrange the 22P cOnnectOr of the caMera in line with that of the aDaPtOr, push
the HOOKs on either end of the caMera in the racK direction of the FraMe set to
secure the two.
Then, ensure that all of the two HOOKs clicks to fix to the racK properly.
M
When the installation is completed, remove the PrOtective cOver and PretOective
taPe from the lens.
ENG.indd 7
22P CONNECTOR
RACK
BRACKET WIRE
FRAME SET
SAFETY WIRE
HOOK
CAMERA
PROTECTIVE TAPE
PROTECTIVE COVER
HOUSING
RACK
HOOK
SCX-DO300 _
2009-10-12 15:28:08
Advertisement
