General Operations; Setting Sleep; Setting Alarm - Bush BAS520BT User Manual

General Operations

Setting Sleep

This function enables the unit to switch to standby mode by itself after a set sleep time.
1. Press MENU button and then press
button to confirm.
2. Press or
and then press SELECT button to confirm. The sleep icon
3. To view the set sleep time, redo above step 1.
4. To turn the sleep function off while the sleep timer is still counting down, select 'Sleep'
option, press or

Setting Alarm

Your unit includes dual alarms. Setting Alarm, make sure that set time at first.
1. Press MENU button and then press
button to confirm.
2. Press or
SELECT button to confirm.
3. Follow your unit's instructions to configure the following parameters:
Alarm states:
Alarm time:
Alarm duration time:
Alarm source:
Last listened:
Alarm active day:
Alarm volume:
4. When display shows 'Alarm Saved', the alarm setting is successful.
5. To temporarily switch off alarm, press SELECT button to activate Snooze function when
the alarm sounds. Press SELECT button repeatedly can set Snooze time of 5, 10, 15 or
30 minutes in turn.
6. To turn off alarm, press STANDBY/ON button when the alarm sounds.
To cancel Alarm, refer to steps1-3 to set Alarm states to 'Off'.
7.
Note:
Selecting Snooze period time depends on which alarm duration time you selected.
or
button to view options Sleep off, 15, 30, 45, 60 and 90 minutes,
button to select 'Sleep off'.
or
button to browse 'Alarm 1 Setup' and 'Alarm 2 Setup', press
or will flash on the display.
On or Off
On Time: 00:00 (manually set up the time )
15/30/45/60/90 minutes
DAB, FM or Buzz
Last listened or saved preset station (not available for
Buzz mode).
Daily, Once, Weekends or Weekdays
press or
button to select Sleep, press SELECT
will show on the display.
button to select Alarm, press SELECT
button to set the alarm volume
BAS520BT
13