StarTech.com ATX8300PRO Instruction Manual page 3

8
Installing the Side Fan
This 8 cm side-panel cooling fan (StarTech.com ID: 8300SIDEFAN) is positioned directly
over your system's CPU so that the cooling air flow goes where it is needed most. The
plastic swing arm allows you to move the fan out of the way when you need to work on
system components.
1. With your system turned off, unplugged, and on its right side, remove the side panel.
2. Align the fan in between the power supply and the input/output panel near the top
of the case with the fan's filter facing upwards.
3. Make sure that the three screw holes in the fan line up with the three screw holes on
the case, and screw the fan to the case.
4. Attach the fan cables to your motherboard according to the motherboard
manufacturer's instructions.
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Assembling Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Enhancing Your Tower Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Product Specifications
Dimensions
Weight
Power Supply
Power Supply Connectors
Power Supply Certification
Motherboards Accepted
Expansion slots
Bays
18.5 (l) x 7.5 (w) x 16.5 (h) in.
17.25 lbs.
300 Watt 12V ATX
5 x 4-pin LP4 female
2 x small internal power
1 x 20-pin ATX motherboard adapter
1 x 4-pin extended ATX power 12V
1 x Aux plug for Pentium 4
CSA, UL, FCC, CE, TUV
12.0 x 9.6 in. Standard ATX (including P4)
Seven
Four external 5.25"
Two external 3.5"
Two internal 3.5"
1