Restrictions During Split Screen Projection; Projecting 3D Images; Preparing To View 3D Images - Epson EH-TW570 User Manual

Projection Functions
• Select Exit Split Screen from the Configuration menu.
Settings - Split Screen - Split Screen Setup
s

Restrictions during split screen projection

Operating restrictions
The following operations cannot be performed during split screen
projection.
• Setting the Configuration menu
• E-Zoom
• Switching the aspect mode (Normal is used for the aspect mode.)
• Operations using the [User] button on the remote control
• Auto Iris
• 3D Display
Help can be displayed only when image signals are not input or when an
error or warning notification is displayed.
Restriction relating to images
• The default values for the Image menu are applied to the image on the
right screen. However, the settings for the image projected on the left
screen are applied to the image on the right screen for Color Mode,
Color Temp., Color Adjustment, Brightness, Contrast, Color
Saturation, and Tint.
• The setting value Off for Progressive and Noise Reduction is applied
to the image on the right screen.
"Signal Menu" p.85
s
• When there is no image signal being input, the display screen is the
color that is set in Display Background. When Logo is selected, the
display is Blue.
• When A/V Mute is performed, the display is Black.

Projecting 3D Images

p.88
You can connect devices that support 3D playback, such as 3D Blu-ray
discs and 3D games, and enjoy stunning 3D images.

Preparing to view 3D images

Make the following preparations before viewing 3D images.
• RF active 3D Glasses (optional/ELPGS03)
• USB Charging Adapter (optional/ELPAC01)
• HDMI cable that supports 3D signals (available in local stores)
• Make the following settings from the Configuration menu.
Supported 3D signals
The projectors support the following 3D signals.
• Frame Packing
• Side by Side
• Top and Bottom
Charging the 3D Glasses
You need to charge the 3D Glasses before use.
Use the supplied charging cable to connect the 3D Glasses to the USB
Charging Adapter, and then connect the USB Charging Adapter to an
electrical outlet.
See the User's Guide for the 3D Glasses for more information on the 3D
Glasses.
‐ 3D Display: On
‐ 3D Format: Auto or the same format as the 3D signal from the
connected device
Signal - 3D Setup p.85
s
51