Advertisement
· Loosen adjustment locking knob by
twisting counterclockwise and rotate ball
head mount to position light at desired
angle; twist locking knob clockwise to hold
light unit firmly in position
Cold shoe mount can also
be removed to reveal an
Note
integrated1/4 20 threading
mount
· to reveal ball head mount's integrated 1/4
20 threading mount for fastening to tripod,
twist locking ring resting above cold shoe
counterclockwise until entire shoe comes
out; insert 1/4 20 screw found on tripod
head into the 1/4 20 threading mount; then
tighten securely
9
LED-6800 - USER MANUAL
INTERLOCKING
WITH OTHER
LED DEVICES
· Slide cold shoe mounting into interlocking
expansion slot of another compatible
Genaray LED light device
· to separate stacked units, press down on
the release tab found at the bottom of the
expansion slot to allow the cold shoe of the
other unit to slide out
· compatible Genaray LED light devices can
be mounted atop one another in a stacked
vertical format for increased illumination
Advertisement
