How To Use; Getting Started; U S In G T He Foo D P Ro Cesso Rattac H Men T - Black & Decker SL1050 Use & Care Manual

HOW TO U S E
This product is for household use only.
G E T T I NG STARTE D
• Remove all packing material and any stickers from the product.
• Remove and save literature.
• Please visit www.prodprotect.com/applica to register your warranty.
• Handle blades carefully; they are very sharp. Wash all parts except base in hot
soapy water. Rinse; then dry.
U S IN G T HE FOO D P RO CESSO R
ATTAC H MEN T
1. Make sure appliance is OFF and unplugged.
2. Remove twist-lock ring from food chute mouth
by turning clockwise (A). Carefully remove blade
cone.
3. Choose appropriate blade set for food you will be
slicing or shredding.
Note: Use the same 2 blades on each side of cone.
4. To place the blades in cone opening, insert the
small tabs on base of blade fitting into the bottom
of the opening. Push top tab in until blade locks in
place. (B)
5. Insert blade cone into food chute mouth (C)
and place twist-lock ring over it. Twist ring
counterclockwise to lock ring into place. (D)
6. Insert food chute assembly into base with the end
angled up and to the right (the food chute mouth
will be angled down towards counter). Turn the
chute assembly counterclockwise until it locks
into base and top of chute is pointing straight up.
(E)
7. Place a bowl under chute mouth to catch prepped
food.
8. Cut food to fit inside the chute and place food in
the top of the food chute.
Tip: For best results, fill so the food does not spill
over. Do not overpack food into chute.
9. Switch on the appliance and gently push food
down towards the blade using the food pusher.
(F)
Note: Always use food pusher to feed food into food
chute. Never push food through chute with hands
or other objects.
4
A
B
C
D
E
F