Risk Analysis; Introduction; Controls; Electromagnetic Compatibility (Emc) - Selco Genesis 30 Use And Maintenance Manual

A compressed air canister must never be directly coupled
to the machine pressure reducer. Pressure might exceed the
capacity of the reducer which might consequently explode.

1.2 ELECTROMAGNETIC COMPATIBILITY (EMC)

1.2.1 General information
Install and use the apparatus keeping to the instructions
given in this manual.
This device must be used for professional application only,
in industrial environments. It is important to remember
that it may be difficult to ensure the electromagnetic com-
patibility in other environments.
1.2.2 Installation, use and area examination
1.2.3 Emission reduction methods
MAINS POWER SUPPLY
This device must be connected to the supply mains accor-
ding to the manufacture’s instructions.
MAINTENANCE
WELDING AND CUTTING CABLES
EQUIPOTENTIAL CONNECTION
EARTHING THE WORKPIECE
SHIELDING

1.3 RISK ANALYSIS

Risks posed by the machine

2.0 INTRODUCTION

2.1 CONTROLS

2.1.1 Front control panel FP120 (Fig.1)
* L1 : Voltage warning light
* Power output light red led.
* L3: torch cap alarm red led.
* L4: compressed air alarm
* L5: Thermal safety device warning light
L5
Solutions adopted to pervent them
EN 60974-1 EN 50192,
EN 50078
EN 50199
green led.
I1 I
red led.
yellow led.
L5