Location Of Controls.4 - Panasonic KX-T7350 Operating Instructions Manual

Location of Controls
* The illustration used in this page is a KX-T7335.
O LCD (Liquid Crystal Display)
(KX-T7335 only)
© AUTO ANS (Auto Answer)/MUTE:
AUTO ANS is used to answer an intercom
call automatically. MUTE is used to listen
to the other party without them hearing you
in the handsfree conversation mode.
VOICE CALL (KX-T7350 only):
Used to receive an intercom call and to
listen to the other party without them
hearing you in the handsfree mode.
© INTERCOM:
Used to make or receive an intercom call.
© PROGRAM:
Used to enter and exit the programming
mode.
© PAUSE (in programming):
Inserts a pause between the access number
and the phone number. PAUSE button works
when you release the PAUSE button.
© REDIAL (ordinarily):
Redials the last number dialed.
© Flexible Outside (CO) Line Buttons:
Used to make or receive an outside call, or
access a feature if the button is assigned as
Programmable Feature button.
© AUTO/STORE
Used for speed dialing in the system or
storing program changes.
© MESSAGE:
Used to send a message or display a
current message.
© TRANSFER:
Used to transfer a call to another party.
© Volume Control Button:
Used to adjust the volume.
© FLASH:
Used to disconnect or send a flash signal.
© SP-PHONE:
Used for the handsfree operation.
MONITOR (KX-T7350 only):
Used for a handsfree dialing operation.
© HOLD:
Used to place a call on hold.
4