Connect Wiring - NuTone CFH52BS Installation Manual

CONNECT WIRING

Remember to disconnect the power. Follow the steps below to connect
the fan to your household wiring. Use the wire nuts supplied with your
fan. Secure the connectors with electrical tape. Make sure there are no
loose strands or connections.
IF INSTALLING OPTIONAL LIGHT KIT, REFER TO
INSTRUCTIONS INCLUDED WITH LIGHT KIT.
1. Connect the fan supply (black) wire and light supply (blue) wire to
the black household supply wire as shown in Figure 6.
2. Connect the neutral fan (white) wire to the white neutral household
wire.
3. Connect the fan ground wire (green) to the household ground wire.
4. Turn the connecting nuts upward and push the wiring into the outlet
box.
5. Attach the switch housing cover to the switch housing with the screws
provided.
Figures 7 and 8 illustrate the wiring connections for optional wall control
(The wire color out of wall control may vary, see wall control's installation
manual for correct wire connections.)
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
OTHER PERSONAL INJURY, MOUNT FAN ONLY ON AN OUTLET
BOX OR SUPPORTING SYSTEM MARKED ACCEPTABLE FOR FAN
SUPPORT.
MODELS CFH52BS • CFH52PB • CFH52RB • CFH52WH
OPTIONAL
WALL
CONTROL
OPTIONAL
WALL
CONTROL
LIGHT
120 VAC
LINE IN
BLUE WH
BLK
WH
OPTIONAL
LIGHT KIT
(style may vary)
FIGURE 6
LIGHT
SWITCH
FAN
WH
BLUE
BLK
WH
OPTIONAL
LIGHT KIT
(style may vary)
FIGURE 7
FAN
WH
BLUE
BLK WH
OPTIONAL
LIGHT KIT
(style may vary)
FIGURE 8
Page 4
GREEN
GROUND
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
FAN
120 VAC
LINE IN
GREEN GROUND
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
120 VAC
LINE IN
GREEN
GROUND
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
FAN