Canon PowerShot A560 User Manual page 78

40
Selecting an AF Frame
[!]
Shooting Mode
fmID "
~ ~ i~
If
SCN*
OM
*Cannot be set in
II
mode.
The AF frame indicates the area of the composition on which the
camera focuses. You can set the AF frame in the following ways.
You can have the camera automatically
detect the position of a face and use this
data to set the focus and exposure*
r
,
while shooting. In addition, the camera
Face Detect
will meter the subject so that the face is
L .J
correctly illuminated when the flash fires.
If a face is not detected, images will be
shot using the [On] option.
* Only in evaluative metering mode
(p. 45).
DOD
The camera automatically selects
DOD
On between 9 AF frames to focus on
DOD
according to the shooting conditions.
DOD
The camera focuses using the center AF
DOD
Off
frame. This is convenient for ensuring
DOD
that your intended subject is in focus and
for composing images.
1
L!J
(Rec.) Menu
IfIr.
[AiAF] (AF Frame)
~
[Face Detect]
*
/[On]/[Off].
See Menus and Settings (p. 19).
* Default setting.
Red-Eye On
Self-h;lle' \:' 1 0
AF·aSSlstBeilil'
on
ReV1611
2
sec.
-[Face Detect]
cannot
be used whenfhel..CDmonitoris
turned
off.