Canon PowerShot A560 User Manual page 18

Using the Self-Timer
1. Press the
~
button to cycle through self-timer settings.
Each time you press the
~
button, the self-timer settings
will change.
[iJ:"~
L-J
* Depending on the shooting mode
II
may also appear. For details
on how to use
lilli,
refer to p. 32
of the Advance'd'Guide.
• When the shutter button is pressed fully, the self-timer lamp will
blink. When setting the red-eye reduction function, the self-timer
lamp will blink and then stay lit for the last 2.
To cancel the self-timer, press
~
button to select
[iJ .
• Changing the Delay Time
1.
L!J
(Rec.) Menu ~ [Self-timer] ~ ~*/~I
~.
See Menus and Settings (p. 20).
* Default setting.
10 sec. delay:· The shutter releases 10 sec. after the shutter
~
button is pressed.
• 2 sec. before tMe shutter releases, the self-timer sound beeps
quickly and the lamp will speed up.
2
sec.
delay: The shutter releases 2 sec. after the shutter button
~
is pressed.
• The self-timer sound beeps quickly when the shutter button is
pressed and the shutter will release 2 sec. later.
Custom Timer: You can change the delay time (0-10*1, 15, 20, 30
sec.) and number of shots (1-10*2) (p. 17).
~
• When a delay time of over 2 seconds is set for the [Delay] option,
the self-timer sound beeps quickly 2 seconds before the shutter
releases. If multiple shots have been specified for the [Shots]
option, the sound will play for the first shot only.
*1 Default setting.
161__
*_2_D_e_fa_u_lt_s_et_ti_n_g_is_3_Sh_o_t_S. - - - - - - - - - - - - -