Canon PowerShot A560 User Manual page 20

-
1.
Press the CEl/Q button ((1)).
The last recorded image will display. If you have
played back images between shooting sessions
however, the last image viewed will display (Resume
Playback) instead of the last recorded image. If the
memory card has been switched, or the images on
the memory card have been edited with a computer,
the newest image on the memory card appears.
2.
Use the • or .. button to display the image you wish to view (@).
Use the. button to move to the previous image and the" button to
move to the next image.
Holding the button down advances the images more rapidly, but shows
them less clearly.
m
See the Advanced Guide for the various playback methods available.
Erasing
Ii I"
>: '" 'it
ifi# !l "
1.
In the playback mode, use the • or .. button to select
an image to erase ((1)) and press the
~
button (@).
~---<3
2.
Confirm that [Erase] is selected and
press the FUNC./SET button (@),
To exit instead of erasing, select [Cancel].
Please note that erased images cannot be
recovered. Exercise adequate caution before
erasing an image.
~See
the Advanced Guide: Erasing All Images (p. 73).
1 8 1 - - - - - - - - - - - - - - - - - - - - - - - -