Yaesu VX-5R Operating Manual page 65

Set Item 10 VFO LINK
Function: Enable/disable the VFO Link feature.
Available Values: ON/OFF
Default: OFF
When this feature "ON," the Main and Sub VFOs are "slaved" so that they change fre-
quency together.
Set Item 11 VFO STEP
Function: Setting of the synthesizer steps.
Available Values: 5/10/12.5/15/20/25/50/100 kHz
Default: Depends on the transceiver version.
Set Item 12 RESUME
Function: Select the Scan Resume mode.
Available Values: 5 SEC/BUSY/HOLD
Default: 5 SEC
5 SEC: The scanner will hold for 5 seconds, then resume whether or not the other station
is still transmitting.
BUSY: The scanner will hold until the signal disappears, then will resume when the car-
rier drops.
HOLD: The scanner will stop when a signal is received, and will not restart.
Set Item 13 SCAN LAMP
Function: Enable/disable the Scan lamp while paused.
Available Values: ON/OFF
Default: ON
Set Item 14 RX SAVE
Function: Select the Receive-mode Battery Saver interval ("sleep" ratio).
Available Values: OFF/200mS(1:1)/300mS(1:1.5)/500mS(1:2.5)/1s(1:5)/2s(1:10)
Default: 200mS(1:1)
Set Item 15 TX SAVE
Function: Enable/disable The Transmit Battery Saver.
Available Values: ON/OFF
Default: OFF
Set Item 16 APO
Function: Set the Automatic Power-Off time.
Available Values: OFF/30 min/1 hour/3 hours/5 hours/8 hours
Default: OFF
VX-5R O
PERATING
M
ANUAL
Set Mode
63