Installation - Miele KM 6395 Operating And Installation Instructions

Installation

Preparing the worktop
The exact positions of the spring
clamps are shown in the building-in
dimensions for the cooktop.
^ Make the worktop cut-out according
to the dimensions given in the
building-in diagram. Remember to
maintain the minimum safety
distances (see "Safety instructions
for installation").
Worktops made of wood
^ Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
Make sure that the sealant does not
come into contact with the top of the
worktop.
^ Place the spring clamps (supplied)
on the upper edge of the cut-out.
^ Secure the spring clamps a with the
3.5 x 25 mm wood screws supplied.
38
Granite and marble worktops
You will require double-sided tape
and silicone (not supplied).
^ Fix the spring clamps in place using
double-sided tape c.
The spring clamps must rest on the
top edge of the cut-out.
^ Apply silicone to the side edges and
the lower edge of the spring clamps.