RIGID TYPE
3.
Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
FLEXIBLE TYPE
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
4.
Whatever type you have, follow
the child seat maker's instructions
for adjusting or tightening the fit.
Installing a Child Seat
TETHER STRAP
HOOK
5.
Lift the head restraint (see page
75
), then route the tether strap
over the seat-back, making sure
the strap is not twisted.
6.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
CONTINUED
ANCHOR
41