Radio Theft Protection - Acura EL 2005 Owner's Manual

Table of Contents

Advertisement

Your vehicle's audio system will
disable itself if it is disconnected
from electrical power for any reason.
To make it work again, you must
enter a specific five-digit code in the
preset buttons. Because there are
hundreds of number combinations
possible from five-digits, making the
system work without knowing the
exact code is nearly impossible.
You should have received a card that
lists your audio system code number
and serial number. It is best to store
this card in a safe place at home. In
addition, you should write the audio
system's serial number in this
Owner's Manual.
If you lose the card, you must obtain
the code number from a dealer. To
do this, you will need the system's
serial number.
If your vehicle's battery is
disconnected or goes dead, or the
radio fuse is removed, the audio
system will disable itself. If this
happens, you will see ''COdE'' in the
frequency display the next time you
turn on the system. Use the preset
buttons to enter the five-digit code.
The code is on the radio code card
included in your Owner's Manual kit.
When it is entered correctly, the
radio will start playing.
If you make a mistake entering the
code, do not start over; complete the
five-digit sequence, then enter the
correct code. You have ten tries to
enter the correct code. If you are
unsuccessful in ten attempts, you
must then leave the system on for 1
hour before trying again.

Radio Theft Protection

If the code card is lost, a dealer can
access your code with your radio's
serial number. To access the serial
number, turn the radio on. It must
display ''COdE'', then turn the radio
off. Push and hold the preset 1 and
preset 6, then press the PWR button.
You will have to store your favorite
stations in the preset buttons after
the system begins working. Your
original settings were lost when the
power was disconnected.
109

Advertisement

Table of Contents
loading

Table of Contents