Acura EL 2005 Owner's Manual page 163

Lights
2. Use a flat-tipped screwdriver to
remove the holding clip from the
inner fender.
3. Pull the inner fender cover back.
160
FRONT PARKING/
HOLDING
SIDE MARKER LIGHT
CLIP
BULB
4. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
5. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
6. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
7. Test the lights to make sure the
new bulb is working.
8. Put the inner fender cover in place.
Install the holding clip. Lock each
one in place by pushing on the
center.
SOCKET