Advertisement
Different operating systems required for the installation and un-installation procedure may
cause the procedure to be different from the one described in this manual. If you see any
differences, please follow the guidelines on the computer to install the software and drive.
Please start your computer, then connect the USB modem to the PC.
1.
(Please note: the signal depends on the local network conditions.)
The operating system will search for data card devices.
2.
The operating system will complete the search for data card devices and show the above
3.
message.
The computer software will be installed automatically on your PC, and the following
4.
message will be displayed.
If step (4) does not start automatically, follow step (5), otherwise go straight to step (6).
Click on "My Computer", then right-click the "HSDPA USB Modem" device and select
5.
"Autoplay", as shown below.
After installation is complete, press FINISH.
6.
3
Advertisement
