Timer And Sleep Operation (Remote Control Only) - Sharp GX-CD5100W Operation Manual

Timer and sleep operation (Remote control only) (continued)
GX-CD5100W
■ Sleep operation
The CD, MP3 disc, radio and cassette tape can all be turned off
automatically.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
and press the MEMORY button.
4
Press the
(Maximum: 3 hours - Minimum: 1 minute)
● 3 hours - 5 minutes
● 5 minutes - 1 minute
5
Press the MEMORY button.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
X : XX".
"X : XX" is sleep remaining time.
● The remaining sleep time is displayed for about 10 seconds.
● You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
26
Downloaded From Disc-Player.com Sharp Manuals
button to select "SLEEP",
or button to select the time.
5-minute intervals
1-minute intervals
or button to select "SLEEP
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the or
OFF", and press the MEMORY button.
■ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to tape in the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the tape and record
radio programmes whilst sleeping.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback or
recording (steps 2 - 10, pages 24 - 25).
Timer playback or
recording setting
Sleep timer setting
1 min ute - 3 hours
Sleep operation will Timer playback or recording
automatically stop. start time
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording will not be possible
04/1/28 CX-GD5100V_EN2.fm
button to select "SLEEP
End time
Desired time
.