Page 2
Hampton Bay Lifetime Motor Warranty Date purchased The retailer warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The retailer also warrants that all other fan...
SAFETY RULES PACKAGE CONTENTS INSTALLING YOUR FAN HANGING THE FAN ELECTRICAL CONNECTIONS FINISHING THE INSTALLATION BLADE INSTALLATION INSTALLING THE MOUNTING PLATE INSTALLING THE LIGHT KIT OPERATING YOUR FAN CARE OF YOUR FAN TROUBLESHOOTING SPECIFICATIONS Table of Contents...
1. Before you begin installing the fan, shut power off at the circuit 9. Do not insert anything into the fan blades while the fan is operating. breaker or the fuse box. 10. Turn the fan off and wait for it to stop completely before 2 Be cautious! Read all instruction and safety information changing the fan direction.
Unpack your fan and check the contents. You should have the following items: Loose parts bag containing: a. Mounting hardware Fan blades (5) 60W candelabra bulbs (2) Plastic wire connectors (3pcs) Mounting bracket (1) Glass shade (1) b . Blade attachment hardware Motor assembly Balancing kit (1) ×...
(available at your Hampton Bay Retailer, the wire color out of wall control s installation manual for correct wire connections).
Page 8
SUPPLY CIRCUIT SUPPLY CIRCUIT SUPPLY CIRCUIT Ground Ground Conductor Conductor Ground Light Conductor Outlet Box Outlet Box Outlet Box Green Light Switch Ground Green Green Lead Ground Ground Lead Lead Ground to Ground to Ground to Downrod Downrod Downrod WHITE WHITE WHITE BLUE...
6.Finishing the Installation 7.Blade Installation Step 1 . Remove motor assembly from "J" hook. Step 1. Attach the fan blades to the motor Attach 3 tumbler bolts (in the loose parts bag)to the assembly using the screws and fiber mounting bracket, do not tighten. Align slotted holes on plate at top of motor assembly with 3 tumbler washer provided, tighten screws securely.
9.Installing the Light 8.Installing the Mounting Kit Assembly Plate Step 1. While holding the light kit NOTE: Before starting installation, disconnect the assembly under your fan, snap together power by turning off the circuit breaker or removing the connection plugs.(Figure 14) the fuse at fuse box.
Fan without Light Kit NOTE WAIT FOR FAN TO STOP BEFORE 1. Disassemble the switch housing from CHANGING THE SETTING OF THE SLIDE th e light kit by loosening the nut at SWITCH. the switch cup (Keep the nut for future use).
Do not use water when cleaning. This could damage the motor, or the wood, or possibly cause an THE HAMPTON BAY FAN&LIGHTING CO. electrical shock. P.O.Box 395 Norco,CA 92860 3.
Problem Solution Fan will not start 1. Check to make sure the wall switch is turned on. 2. Check circuit fuses or breakers. Caution! Make sure the power is turned off before performing the following steps: 3. Remove canopy and check wire connections. 4.