425 / 475 // 435 / 485 // 473D / 473P Instruction manual / Backpack Sprayer Spare parts list Attention! Read this instruction manual carefully before first operation and strictly observe the safety regulations! At using the sprayer wear protective gloves, goggles and breathing protection.
Congratulations on the purchase of your new 2. General Information SOLO Sprayer. We thank you for your wise choice and are confident that you will be very happy with it. The SOLO Pressure Sprayer is designed for the The use of modern materials in conjunction with...
4. Assembly 5. Correct choise of The Sprayer is assembled except for the pump lever which can be attached to either side. (discharge hose and lever grip already fitted) 1-off lever grip (LX lever model). The pressure sprayer is supplied with fittings for assembly of the lever grip (LX lever) preattached on the left-hand side (facing towards the tank inscription).
To protect piston, cylinder and piston collar (models • Older, free standing trees 3.0 - 5.0 ltr. per tree 425/435/ 473P) from impurities in the spray solution, an • Small Shrubs 1.0 - 1.5 ltr. for 10 m2 additional filter is fitted on the inlet side of the pressure tank.
Thus SOLO recommends that you have a specialized SOLO workshop carry out all work that is not described in these operating instructions. Your SOLO specialist has the required training, experience, and equipment at his disposal to provide you with the most cost- effective solution and can help you in many ways with advice and service.
Made in Germany SOLO SOLO Postfach 60 01 52 P.O.Box 60 01 52 D 71050 Sindelfingen D 71050 Sindelfingen Germany Tel. 07031-301-0 Phone+49-7031-301-0 Fax 07031-301-130 +49-7031-301-149 info@solo-germany.com export@solo-germany.com...
Need help?
Do you have a question about the 425 and is the answer not in the manual?
Questions and answers