Advertisement
Rules for Safe Operation
To help ensure safe operation, please take a moment to learn the machine's applications and limita-
tions, as well as potential hazards. General International disclaims any real or implied warranty and
hold itself harmless for any injury that may result from the improper use of it's equipment.
1. Make sure that the operator has been proper-
ly trained and has read, and understands, the
owners' manual before operating any machinery.
2. Do not operate this bench grinder when tired, dis-
tracted or under the effects of drugs, alcohol or any
medication that impairs reflexes or alertness.
3. Keep the work area well lit, clean and free of debris
or clutter.
4. Keep children and visitors at a safe distance; do
not permit them to operate the unit.
5. Childproof and tamper proof your shop and all
machinery with locks, master electrical switches
and switch keys, to prevent unauthorized or unsu-
pervised use.
6. Stay alert! Give your work your undivided attention.
Even a momentary distraction can lead to serious
injury.
7. Do not wear loose clothing, gloves, bracelets, neck-
laces or other jewelry while operating machinery.
Wear protective hair covering to contain long hair
and wear non-slip footwear.
8. Fine particulate dust is a carcinogen that can
be hazardous to health. Work in a well ventilated
area and wear eye, ear and respiratory protection
devices.
9. Whenever possible use a dust collector to minimize
health hazards.
10. Keep hands and other body parts well away from
grinding wheels and all moving parts or other
cutting tools. Do not clear chips and grinding dust
away with hands, use a brush.
11. Make sure the grinding wheels are running at full
operating speed before grinding.
12. Do not force the grinding wheels or push too hard.
The unit will perform better, safer and more effec-
tively at the speed or rate for which it was designed.
13. Never leave the power on or the machine running
while it is unattended.
14. Use recommended speed grinding wheels, acces-
sories, and work piece material.
15. Never stand or lean on the bench grinder. Serious
injury could occur if the unit is tipped or if uninten-
tional contact is made with its' moving parts.
16. Before starting the unit, make sure the grinding
wheels are securely installed and tight to the arbor
shaft.
17. Keep all guards and safety devices in place and in
good working order. If a guard must be removed
for maintenance or cleaning make sure it is pro-
perly re-installed before using the machine again.
18. Before performing any maintenance, repairs or ad-
justments including wheel changes, make sure the
power is off and the unit is unplugged.
19. Before plugging in and turning on the power, make
sure that any adjustment tools, keys or wrenches
have been removed and safely stored.
20. Always, make sure that switch is in "OFF" position
before plugging in the power cord.
21. Only use accessories that are made or designed
for this machine. The use of parts or accessories that
are not recommended by General International
will void any warranty claims and may result in
injury.
22. Make sure the machine is properly grounded. This
unit is supplied with a three-prong electric plug; it
should be plugged into a three-pole electrical
receptacle. Never remove the third prong.
23. Do not use this bench grinder for any purpose other
than it's intended use. If used for other purposes,
General International disclaims any real or implied
warranty and holds itself harmless for any injury
which may result from such use.
Advertisement
