LG Minibeam PW800 Owner's Manual page 8

8
SAFETY INSTRUCTIONS
Do not block the light beam emitted
y
from the projector using a book or
other object.
- Lengthy exposure to the projector
beam may result in fire. In addition,
the lens may be overheated and
damaged by the reflected heat.
Do not start the projector with the
y
volume turned up high.
- High volume may damage hearing.
Do not use high voltage electrical
y
equipment near the projector, (e.g.,
a bug zapper). This may result in
product malfunction.
Cleaning
WARNING
Do not spray the projector with water
y
when cleaning. Make sure water does
not flow into the projector.
- This may result in fire or electric
shock.
When there is smoke or a strange
y
smell coming out from the projector or
a foreign object falls into the pro jector,
switch it off and unplug it from the
power outlet and contact our service
center.
- Otherwise, this may result in fire or
electric shock.
Use air spray, a soft cloth, or a cotton
y
swab moistened with a lens cleaning
chemical or alcohol to remove dust or
stains on the front projection lens.
CAUTION
Contact your seller or our service
y
center once a year to clean the
internal parts of the projector.
- If you do not clean the projector
for a long period of time, dust will
accumulate, which may result in fire
or damage to the projector.
When cleaning plastic parts such
y
as the projector case, unplug the
power first and wipe with a soft cloth.
Do not spray with water or wipe with a
wet cloth. Never use glass cleaner,
automobile or industrial polish,
abrasives, wax, benzene, or alcohol
as these can damage the projector.
- This can result in fire, electric shock,
or cause damage to the product
(deformation and corrosion).
Remove the plug from the outlet
y
before cleaning the product.
- Otherwise, this may result in electric
shock.