28
USING THE PROJECTOR
Focus of the Screen Image
When an image appears on the screen, check if it is in focus and fits the screen
properly.
Adjust the focus of the image by rotating the Focus Ring to the left or right.
Make sure the product does not move when adjusting the focus.
Watching Projector
1
In standby mode, press the POWER button to turn the projector on.
2
Press the INPUT button and select the input signal you want.
3
Control the projector using the following buttons while watching projector.
Button
CH
,
LIST
Number buttons
VOL +, -
MUTE
Q.MENU
FLASHBK
4
To turn the projector off, press the POWER button.
Changes the TV channel.
Displays the channel list.
Enters a number.
Adjusts the volume level.
Mutes all sounds.
Accesses the quick menu. (See page 33.)
Displays the channel you were watching previously.
Focus Ring
Description