LG Minibeam PW800 Owner's Manual page 5

Be careful not to tip the projector over
y
when connecting external devices to
the projector.
- This may cause personal injury or
damage to the projector.
Power
WARNING
The appliance coupler is used as the
y
disconnect device.
- Please make sure the device is
installed near the wall outlet to which
it is connected and that the outlet is
easily accessible.
The grounding wire should be
y
connected.
- Ensure that you connect the
grounding cable to avoid electric
shock.
If it is not possible to ground the unit,
have a qualified electrician install a
separate circuit breaker.
Do not try to ground the projector
by connecting it to telephone wires,
lightning rods, or gas pipes.
The power plug should be inserted
y
fully into the power outlet.
- An unstable connection may cause
a fire.
Do not place heavy objects on the
y
power cord.
- This may result in fire or electric
shock.
Never touch the power plug with wet
y
hands.
- This may result in electric shock.
Do not plug too many devices into
y
one multi-power outlet.
- This may result in fire due to the
power outlet overheating.
SAFETY INSTRUCTIONS
Keep the AC adapter, power plug,
y
and the used power outlet clean from
dust or foreign materials building up.
- This may result in fire.
If there is any smoke or a burning
y
smell from the projector or AC
adapter, stop using the product
immediately. Disconnect the power
cord from the power outlet, and then
contact the customer service center.
- This may result in fire.
To turn off the main power, remove
y
the power plug, which should be
positioned so it is easy to access for
operation.
CAUTION
Always grab the plug to remove the
y
AC adapter or power cord.
- Otherwise, this may result in a fire
or may damage the product.
Refrain from constantly bending the
y
power cord of the AC adapter.
- If the power cord is bent excessively
for a long period of time, the cord
may break inside. This may result in
a fire or electric shock.
Ensure the power cord and plug are
y
not damaged, modified, severely
bent, twisted, pulled, sandwiched
or hot. Do not use the product if the
power outlet is loose.
- This may result in fire or electric shock.
Keep the power cord away from heating
y
devices.
- The wire's sheath may melt, which
may result in fire or electric shock.
Place the projector where people will
y
not trip over or step on the power
cord to protect the power cord and
plug from any damage.
- This may result in fire or electric shock.
5