Option 2 Settings - LG Minibeam PW800 Owner's Manual

OPTION 2 Settings

1
Press the SETTINGS button.
2
Use the , ,
OPTION 2 and press the OK button.
3
Use the , ,
desired item and press the OK button.
- To return to the previous menu, press the
button.
4
Press the EXIT button when completed.
The available option 2 settings are described as follows.
Item
Keystone
Auto Keystone
PJT Mode
High Altitude
Blank Image
, or button to select
, or button to set up the
To prevent the screen image from becoming trapezoidal,
Keystone adjusts the top and bottom width of the image if the
projector is not set at a right angle to the screen.
Auto Keystone provides a rectangular screen image by
automatically adjusting the Keystone number when there is a
trapezoidal screen image caused by tilting of the projector.
Item
On Automatically adjusts the Keystone number.
Off
Manually adjusts the Keystone number.
This function turns the projected image upside down or flips horizontal.
Select Rear when projecting from the back of the transparent
y
screen purchased separately.
Select Front Ceiling when installing the product on the ceiling.
y
When PJT Mode is Rear/ Front Ceiling, the left/right of the
y
speaker changes automatically.
If the projector is used at an altitude higher than 1200 meters,
turn this on.
Otherwise, the projector may overheat or its protection function
may be activated. If this happens, turn the projector off and then
on again after waiting for several minutes.
Selects a background for blank Image.
CUSTOMIZING SETTINGS
OPTION 2
y Keystone
y
y Auto Keystone
y
y PJT Mode
y
y High Altitude
y
y Blank Image
y
y Auto Power
y
y Self Diagnosis
y
Description
73
ꔂ Move ꔉ OK
0
- +
: On
: Front
: Off
: Blue
: Off