Advertisement
13. Output analog. These analog RCA outputs go to the RCA inputs of the stereo (pre)
amplifier. The top one is for the left channel, the bottom one for the right channel.
14. Output analog. These analog XLR balanced outputs go to the balanced inputs of the
stereo (pre) amplifier. The right one is for the left channel, the left one is for the right
channel. Seen from the back of the converter.
15. IEC Power Chassis Connector. To be connected with the proper wall socket, which
must be earthed or grounded. Every Van Medevoort product is optimized for your
country's electrical standards. e.g. 230V-50Hz or 115V-60Hz. This cannot be
changed. Please check that your product is set to the correct voltage setting
BEFORE connecting to an AC power outlet. Any faulty connection will invalidate the
warranty.
16. Output digital SPDif coaxial and optical TosLink, send through the signal of the input
which is switched on.
17. Input 4 digital is the USB input, to connect to a PC, where after the PC can use this
DAC as a soundcard.
18. Input 3 digital, is also switchable between SPDif optical (switch left) and SPDif RCA
(switch right)
19. Input 2 digital, is also switchable between SPDif optical (switch left) and SPDif RCA
(switch right)
20. Input 1 digital, is also switchable between AES/EBU XLR (switch left) and SPDif
RCA (switch right).
6
vM CD360 STEREO CD PLAYER / DAC
Controls
Precautions
Connections
Maintenance and advice
Technical Specifications
Advertisement
