Advertisement
6. OPEN. Switch to open and close the CD tray.
In the display appears the actual status of the player.
7. PREV. To choose previous track.
8. NEXT. To choose next track.
9. STOP. Stops playing the CD.
10. PAUSE. Interrupts CD playing, to restart push PLAY.
11. PLAY. Starts CD playing.
12. Input switches with indication Leds for DAC inputs 1~4.
When CD is loaded, it stops and display goes in off position.
Attention:
Because this machine is first a CD player and second a DAC, all major functions have to
be done from the CD positions. When in use as a DAC, switch input 1~4. For CD switch
to input 5. The Stand-By on/off status is only available from the CD position, not from
DAC, so press first CD on the remote control and then Stand-By.
When you switch on with the power switch, the CD360 starts always in the CD mode.
Take some time to load the system and then switch to DAC 1~4.
For the Remote Control see the attachment RC2013.
4
vM CD360 STEREO CD PLAYER / DAC
Advertisement
