Table of Contents
Advertisement
Wireless Settings
Wireless settings allow you to set the wireless configuration items.
1. Wireless Operation Mode: Choose AP mode or Client mode. The factory default setting
is AP mode.
2. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client
stations can roam freely over this product and other Access Points that have the same
Network ID. (The factory setting is "default")
3. SSID Broadcast: The router will broadcast beacons that have some information,
including SSID so that wireless clients can know how many AP devices by scanning
function in the network. Therefore, this function is disabled; the wireless clients can not
find the device from beacons.
4. Channel: The radio channel number. The permissible channels depend on the Regulatory
Domain.
The factory setting is channel 11.
5. Wireless Mode: Choose B/G Mixed, B only, G only, and N only, G/N Mixed or B/G/N
mixed. The factory default setting is B/G/N mixed.
6. Authentication mode: You may select from nine kinds of authentication to secure your
wireless
network:
WPA-PSK/WPA2-PSK.
Open,
Shared,
Auto,
WPA-PSK,
WPA2-PSK,
and
29
Advertisement
Table of Contents
