Data Cable - Nokia 6700 User Manual

48 Connectivity
device and the other device can be made
without your knowledge. No separate
acceptance or authorization is needed.
Use this status for your own devices, such
as your compatible headset or computer,
or devices that belong to someone you
trust. If you want to accept connection
requests from the other device separately
every time, select
To use a Bluetooth audio accessory such
as a Bluetooth handsfree or headset, you
need to pair your device with the
accessory. For the passcode and further
instructions, see the accessory user guide.
To connect to the audio accessory, switch
on the accessory. Some audio accessories
connect automatically to your device.
Otherwise, open the paired devices tab,
select the accessory and
Connect to audio
Block devices
Select Settings
>
Bluetooth.
To block a device from establishing a
Bluetooth connection to your device, open
the paired devices tab.
Select a device you want to block and
Options > Block.
To unblock a device, open the blocked
devices tab, and select
Delete.
To unblock all blocked devices, select
Options Delete
>
If you reject a pairing request from
another device, you are asked if you want
to block all future connection requests
Set as unauthorized.
Options
>
device.
Connectivity
>
Options
>
all.
from this device. If you accept the query,
the remote device is added to the list of
blocked devices.

Data cable

To avoid damaging the memory card or
corrupting data, do not disconnect the
USB data cable during a data transfer.
Transfer data between your device and
a PC
1 Insert a memory card in your device,
and connect the device to a
compatible PC with the USB data
cable. Always connect the data cable
first to your device, and then to the
other device or computer.
2 When the device asks which mode to
use, select
mode, you can see your device as a
removable hard drive in your
computer.
3 Transfer data between the computer
>
and your device.
4 End the connection from the
computer (for example, from an
Unplug or Eject Hardware wizard in
Windows) to avoid damaging the
memory card.
To transfer images from the device to a
compatible PC, or to print the images
stored in the device on a compatible
printer, connect the USB data cable to the
PC or printer, and select
To modify the USB mode settings, select
Settings
>
To change the USB mode you normally use
with the USB data cable, select
connection
© 2010 Nokia. All rights reserved.
Mass storage. In this
Image
Connectivity
>
mode.
transfer.
> USB.
USB