Charge The Battery; Desk Stand Dt-19; Data Cable - Nokia RM-233 User Manual

I Charge the battery
Charging the BL-4U battery with the AC-6 charger takes approximately 3.5 hours
while the phone is in the standby mode.
1. Connect the charger to a wall socket.
2. Connect the lead from the charger to the charger
connector at the bottom of your phone.
If the battery is completely discharged, it may take a
few minutes before the charging indicator appears on
the display or before any calls can be made.
I Desk stand DT-19
The desk stand allows you to charge the phone battery with power supplied from
the AC-6 charger or from your laptop when connected using the CA-101 data
cable. The charge level of the phone battery is indicated on the display. The desk
stand also allows data transfer.
I CA-101 data cable
The CA-101 data cable is used for data transfer and slow charging the battery
while connected to a PC or laptop.
You must download Nokia PC Suite 6.83 to use with your phone. Updated versions
can be added after version 6.83. Go to www.nokia.com/support for more
information.
1. Connect the lead from the CA-101 to the micro USB socket on the bottom of
your phone.
2. Connect the CA-101 to your PC or laptop. Select USB mode: appears on the
display screen of your phone.
3. Select the mode you want.
The AC-6 charges the battery much faster than the CA-101. Charging with the
AC-6 is recommended when short charging times are needed.
G e t s t a r t e d 13