BenQ XL Series User Manual page 12

(For XL2420)
Turn the stand counterclockwise to align the arrow
at the end of the stand with the one on the
monitor base (
and tighten the thumbscrew as illustrated (
Then push the lid back.
Gently attempt to pull them back apart to check
that they have properly engaged.
(For XL2720)
Lift up one end of the stand slightly to ensure a
successful installation (
stand to the monitor base as illustrated (
sure to align the arrow on the end of the stand to
the one on the monitor base.
Turn the stand clockwise until you cannot go
further.
12 How to assemble your monitor hardware
). Raise the thumbscrew lid (
). Attach the monitor
)
).
1
). Make
XL2420
3
XL2720
2
1
XL2720
2