Remote Control - Sanyo DC-DA180 Instruction Manual

AM loop aerial
Assemble the loop aerial as shown in figure. Unwind the aerial wires, then
connect them to the AM LOOP terminals. Place the loop aerial in a position
which yields the best AM reception, or attach it to a wall or other surface
as shown in figure.
2
1
1 2
Y OFF Z ON
13
14
TUNER/ BAND
FUNCTION
15
PRESET
16
PHONES
MEMORY
17
18
REC PLAY
m a
20
19
Controls
3
2
Screws (not supplied)
3 4 5 6
i
n
VOLUME
SURROUND
TU UP
c/ e
BASS
XPANDER
TU DOWN
f/ d
SOUND PRESET
DOWN UP
PUSH TO CLOSE
REW F FWD STOP/ EJECT PAUSE
d c n/q k
22 24
21 23

REMOTE CONTROL

1. Number buttons (1-9, 0)
2. Play/ Pause button ( i )
3. Memory button (MEMORY)
4. Radio band button (BAND)
5. Stop/ Clear button ( n )
6. Volume buttons (VOLUME +,–)
7. Preset button (PRESET)
8. Repeat/ FM mode button
(REPEAT/ FM MODE)
9. Tuning/ Skip/ Search buttons
(TUNING– f ,TUNING+ e)
Note:
To minimize noise, the speaker, mains and any other leads should not
come close to the indoor or external aerial lead and AM loop aerial. Do not
place the aerial leads close to the system.
Subwoofer output socket (SUB WOOFER)
Connect the amplified subwoofer (not supplied) to the SUB WOOFER
1
socket.
Headphones
Connect stereo headphones (not supplied) to the PHONES socket for
monitoring or for private listening. The speakers are automatically discon-
nected when headphones are connected.
CONTROLS
CD player / Tuner / General
1. CD compartment lid
2. Radio band button (TUNER/BAND)
3. Display
4. Volume control (VOLUME DOWN/UP)
5. Surround button (SURROUND)
6. CD compartment opening button (CD OPEN)
7. CD Play/Pause button ( i )
7
8. Stop/Clear button (n )
9. Tuning up/Skip/Search button (TU UP g)
8
10. Bass expander button (BASSXPANDER)
11. Tuning down/Skip/Search button (TU DOWN h)
9
12. Sound preset button (SOUND PRESET)
10
13. Power button (Y OFF, Z ON)
11
14. Remote sensor (IR)
15. Function button (FUNCTION)
12
16. Preset button (PRESET)
17. Headphones socket (PHONES)
18. Memory button (MEMORY)
25
Cassette deck
19. Record button (REC)
20. Play button (PLAY)
21. Rewind button (REW)
22. Fast forward button (F FWD)
23. Stop/Eject button (STOP/EJECT)
24. Pause button (PAUSE)
25. Cassette holder
-2-
Number buttons (1-9, 0)
These buttons are used to select the track numbers
on a disc or preset radio stations.
If the function is "CD", the buttons select the track
numbers on a disc.
If the function is "TUNER", the buttons select preset
radio stations.
With any other function, the buttons will not function.
- Two buttons must always be pressed.
Example:
To select No. 3, press 0, then 3.
To select No. 10, press 1, then 0.
To select No. 25, press 2, then 5.