Maintenance - Sanyo DC-DA180 Instruction Manual

Micro component system
Hide thumbs Also See for DC-DA180:
Table of Contents

Advertisement

Recording copyright material without permission of the copyright own-
ers is usually an infringement. If you wish to re-record copyright
material, permission from the copyright owner is necessary. SANYO
does not approve of, and cannot be held responsible for, any unlawful
use of this machine.
Recording compact discs (Synchronous recording)
1. Load a blank cassette.
2. Select "CD" function.
3. Load the disc to be recorded.
-
Select the track number if required.
-
For programmed recording, programme the material in advance
(as described under "PROGRAMMED PLAY").
4. Press the REC button. The PLAY button is engaged simultaneously
and CD recording starts.
-
When you want to record music as you listen, press the REC button.
Recording starts automatically from the beginning of the track.
5. Press the STOP/EJECT button to stop recording.
When the end of the tape is reached, the CD player and deck stop
automatically.
Recording from the tuner
1. Load a blank cassette.
2. Tune in the radio station to be recorded.
3. Press the REC button to start recording.
4. Press the STOP/EJECT button to stop recording.
Cleaning the tape heads
To ensure continued high performance, use cotton swab to clean the
heads, pinch roller and capstan of the deck after about every 10 hours of
use. If the dirt persists, soak the swab in a little methylated spirit or head
cleaning fluid and then clean.
1.
2.
3.
4, 5.
RECORDING

MAINTENANCE

Cotton swab
Capstan
Pinch roller
Head
When beat is heard
Beat (a high-pitched noise) may sometimes be heard during the recording
of radio broadcasts. If this occurs, while the MEMORY button is pressed,
press the TU UP button at the same time to reduces the level of the beat
noise.
Safeguards against accidental erasure
Accidental erasure can be prevented by breaking out the tabs on the end
of the cassette tape (where the tape is not exposed) using a screwdriver
or similar implement.
If a tab is broken out in error and you wish to re-record the tape, simply
block the tab hole using adhesive tape and the tape can be used for
recording again.
Side A
Cleaning the CD player lens
The lens should never be touched. If dust is on the lens, blow it off using
a camera lens blower. (Consult your dealer.)
Cleaning the unit
Clean the outside of the unit with a clean soft cloth, moistened with
lukewarm water. Do not use benzene, thinner of alcohol since they will mar
the finish of the surfaces.
-6-
Side B
Break out tab A for side A.
Break out tab B for side B.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents