Setting The Clock - Lincoln MKT Owner's Manual

Entertainment Systems
3. Enter a four digit Personal
Identification Number (PIN) and
press 'Enter'. The system will ask
you to re-enter the PIN. Once
entered, select 'Enable' to activate
Valet mode. The system is then
locked until the correct four digit
PIN is entered.
Note: The PIN can be reset by simultaneously pressing and holding
presets 1 and 5 while on the PIN entry screen. After approximately five
seconds, the system will transition to the Valet mode screen indicating
that the PIN is reset. Once you have reset the PIN, the system will then
allow you to set a new PIN.

Setting the clock

1. Press the CLOCK hard button.
2. Select from the following display
options:
Time set buttons: To set the time, press +, — to increase/decrease the
time and select AM or PM.
Display clock: Press to turn the clock display on/off.
Format: Press to select between 12 hour and 24 hour format.
Time Zone: Press to select your time zone.
Note: The system does not implement daylight savings time.
Restore defaults: Select 'Reset' to reset to the default settings.
40
2010 MKT (mkt)
Owners Guide, 1st Printing
USA (fus)