4-2 Playback
Normal playback
First insert a cassette.
For details of how to insert a cassette, see Section 3-5-2,
"Inserting and Ejecting Cassettes" (page 3-10).
6
0
PLAY button
To start playback
Press the PLAY button.
Playback starts, the servo locks, and the SERVO
indicator lights.
To stop playback
Press the STOP button.
If you play back to the end of the tape
The tape is automatically rewound, and stops.
When using the Dolby noise reduction system
When using an analog Betacam cassette, you can use
Dolby C noise reduction for audio playback.
To activate the Dolby noise reduction system, set the
DOLBY NR switch on the subsidiary control panel to
ON.
4-8
Chapter 4 Recording and Playback
Cassette compartment
%
9
)
p
STOP button
Playback in jog mode
In jog mode, you can control the speed of playback by
the speed of turning the search dial. The playback
speed range is ±1 times normal speed.
To carry out playback in jog mode, use the following
procedure.
6
0
1
Press the JOG button or search dial so that the JOG
button is lit.
Pressing the search dial toggles between jog mode
and shuttle mode.
2
Turn the search dial in the desired direction, at the
speed corresponding to the desired playback speed.
Playback in jog mode starts.
3
To stop playback in jog mode, stop turning the
search dial.
The function to toggle between jog mode and shuttle
mode each time the search dial is pressed can be
disabled by changing the setting of extended menu item
101.
%
9
)
p
1 1,2,3