Table of Contents
Advertisement
8. OUTPUTS
A. Specifications:
Type: EIA-RS-232C
Method: Half-duplex, asynchronous transmission
Format: Baud rate: 600, 2400, 4800, 9600 or 19200
Data bit: 7
Parity bit: 1 (EVEN)
Stop bit: 1
Code: ASCII
Stop bit: 1
Code: ASCII
1
0
0
START BIT
B. Transmission Modes
1. KPC (Keyboard prints control): One weight data reading only will
be transmitted when the W-10 PRINT key is pressed, unless the BUSY
input is low.
2. AUTO: Auto-Print means that data will be transmitted for printing
once per weighing event (resetting when display is < 100D).
3. SM (Stream mode): In stream mode data
continuously unless the BUSY input is low, when it be stopped.
4. CMD (Command mode): In command mode data will only be sent when
a "READ" command is received from an external device, BUSY input
is invalid.
Refer to 6.1 SETTING BASIC PARAMETERS for transmission mode.
1
2
3
4
DATA BITS
5
6
STOP BIT
PARITY BIT
will be transmitted
Advertisement
Table of Contents
