Replacing License Plate Lamp Bulbs; Replacing Fog Lamp Bulbs - Lincoln 2011 MKX Owner's Manual

Lights

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the off position.
2. Remove the two screws and the
license plate lamp assembly from
the liftgate.
3. Carefully pull the bulb straight
out from the lamp assembly.
Install new bulb(s) in reverse order.

Replacing fog lamp bulbs

1. Make sure the fog lamp switch is
in the off position.
2. From underneath the vehicle,
remove the splash shield and rotate
the harness/bulb assembly
counterclockwise, to remove from
the fog lamp.
3. Carefully disconnect the bulb
from the harness assembly via the two snap clips.
Install the new bulb in reverse order.
56
2011 MKX (mkx)
Owners Guide, 1st Printing
USA (fus)