Getting Started - Pintek PA-655 Instruction Manual

Getting Started:

The PA-655 current probe enables a general purpose oscilloscope to
display AC and DC current signals up to 100 amps Peak (35A RMS). The
PA-655 current probe can also make AC and DC measurements with a
multimeter by using the recommended accessory MT-246N
(BNC-to-banana) plug adapter.
Battery Inside
(suggested outdoor using)
Output Into BP-250
AC Adaptor Input
Figure 1: shows the controls and indicators on the PA-655 current probe.
Press Button
Range Selection
(Power On/Off)
6
www.tmatlantic.com
Max. 11∅ Wire
DC Zero Offset