Table of Contents
Advertisement
Disassembling/Assembling the Cover panel for indoor unit installation
Removing the Cover panel (Before mounting the indoor unit)
The bottom panel fi ts the main body using the side, center, and bottom hooks as shown. Unlock the side hooks
fi rst, and then unlock the center and bottom hooks.
Check the location of the hooks before removing the cover panel.
Center
hooks
Bottom hooks
Removing the hooks on the side
Caution (fragile)
- Gently press the both side of the cover
panel inwards ( ) and release the hooks
on both sides( ).
Assembling the Cover panel (After mounting the indoor unit)
To assemble the Cover panel, proceed in reverse order of disassembling.
Use both hands for assembling and be extra careful not to damage the pipes and drain hose.
Lock the side, center, and bottom hooks in this sequence. Tighten the bottom panel with the screws, and close
the screw holes with their cap.
Location of the hooks on the central part
Number and location of the hooks
Side
hooks
Center hook
For specifi c Hook location and quantity, please
refer to cover panel with indicating arrows
based on physical goods.
Removing the hooks on the central part
Caution (fragile)
- Use both hands
- Release each hook by pushing it up at an angle.
<Lock the side hook>
<Fasten the screw>
English-8
Bottom hook
<Lock the bottom hook>
<Assemble the Cap screw>
Advertisement
Table of Contents
