Audio System; (If Equipped) - Mitsubishi Mirage Owner's Manual

B
D
A
To enter frequencies into the memory (AM/FM)
1. Press A to turn on the audio system.
2. Press B to select the desired band (AM/FM).
3. Press C to Seek Station
4. Hold down one of the Memory select buttons D (1-6) until it
beeps in order to save that station to memory.
Audio Remote
VOLUME
Control Button
UP

(if equipped)

SEEK
Change
station or
track
VOLUME
Down
NOTE: Please refer to your Owner's Manual for more detailed
information on how to use your audio system.
C
MODE
Change the
audio source
USB and iPod Input (if equipped)
To connect a USB memory device
1. Park your vehicle in a safe place and turn
the ignition switch to the "OFF" position
or put the operation mode in OFF.
2. Open the glove compartment and remove
the connector cable A , B from clips C .
3. Connect a commercially available USB
connector cable D to the USB memory
device E .
4. Connect the commercially available
USB connector cable D to the vehicle's
connector cable B . Be sure to hold the
terminal part A of the connector cable as
shown in the illustration.
5. Fix the connector cable A , B on the clips.
To remove
1. Turn the ignition switch to the "OFF"
position or put the operation mode in OFF.
2. Remove the commercially available USB
connector cable D . Be sure to hold the
terminal part A of the connector cable as
shown in the illustration.
3. Fix the connector cable on the clips and
close the glove compartment.
7

AUDIO SYSTEM