Sony TRINITRON KV-32HS20 Service Manual page 277

Installing the TV
12
To set up your TV to use both a Cable Box and a direct-connect CATV cable:
1
Connect the Cable TV cable to the TV's VHF/UHF jack.
2
Using a coaxial cable, connect the TV's TO CONVERTER jack to
the cable box's IN jack. The TV's internal converter allows you to
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.
3
Using a coaxial cable, connect the cable box's OUT jack to the
TV's AUX jack.
Cable box
IN
OUT
75-ohm coaxial cable (not supplied)
CATV cable (unscrambled channels)
To switch between channels from Cable Box and channels coming directly into TV
Press the ANT button on the TV remote control.
To use the TV remote control to switch channels on the cable box
Program the remote control as necessary. (See "Programming the
Remote Control" on page 50.)
To use the cable box
Have your TV tuner set to channel 3 or 4 (as appropriate) and
then use the Cable Box to change channels.
To prevent the accidental switching of TV channels
When using the VCR of Cable Box, you can use the Channel Fix
feature to lock in a channel. The Channel Fix feature is under the
Channel menu. (See "Using the Channel Menu" on page 40.)
AUX
Rear of TV
TO CONVERTER
Signal
VHF/UHF